Lennon granite – Granite is a stone with a crystalline texture. As countertop material, granite is somewhat difficult to work with. It is heavy and prone to jump. Once it is in place, it is advisable not to move. With the right tools, you can cut granite countertops in place, expanding the usefulness of your accountant in the coming years.
Cut Lennon granite countertops in the plaza, Dial a chalk line along the surface of granite which will make the cut, using a ruler to guide you in making the brand. As for the brand carefully twice, setting the mark that is necessary to ensure that is cut in the right place. Place a strip of masking tape along the chalk line to serve as a guide to make the cut. Place a sheet of diamond cutting ability for a saw equipped with a vacuum hose attachment to collect dust created from making the cut.
Turn on the vacuum and adjust the skill saw on Lennon granite in the beginning of the line masked court. Cut slowly and carefully so you can create a straight cut along the line. Continue to cut, push the saw along the line until it reaches the end of the guide masking tape. Turn off the saw and remove the top sheet. Remove masking cutouts for sinks complete cut lines section for guides. Cut the remaining three lines cut, which has a helper hold the counter top by the suction cups to support him as the final cut is placed. This prevents cutting down on the closet below.